Glow Wire Tester IEC 60695-2-10 with 500-1000 Degree Range and 0.94-0.96 N Pressure for Flammability Testing

Glow Wire Test Machine IEC 60695-2-10 Electrical Product Flame Combustion Test

Glow Wire Test Machine Scope of application:

The glow wire tester uses a heating wire (Φ4 mm nickel-chromium wire) of specified material (Ni80/Cr20) and shape to heat to the test temperature (550℃~960℃) with a large current for 1 minute. It then applies a specified pressure (0.95±0.1N) to the test sample vertically for 30 seconds. The test sample and bedding are observed to determine whether they ignite or how long they burn. The glow wire tester can also measure the ignition properties, ignition temperature (GWIT), flammability, and flammability index (GWFI) of solid insulating materials and other solid combustible materials. It is also suitable for the insulation materials, engineering plastics, or other solid combustible materials industries.

Glow Wire Test Machine Standard :

*IEC60695-2-10
*UL74A
*DIN695

*IEC829

*VDE0471

Glow Wire Tester Test Machine Features:

1. Utilizing a single-chip microcomputer (MCU) + touchscreen control system and a high-precision temperature gauge, the electronic control system addresses the limitations of digital-to-analog conversion accuracy in PLC systems while also improving anti-interference capabilities. Microcomputer control offers greater precision.
2. Start, timing, ventilation, lighting, and heating are all controlled on the touchscreen. After a test cycle is completed, the device automatically saves the data; simply edit the saved name. All saved data is available for review in the historical data section.
3. 7-inch color touchscreen
4. Intelligent 7mm limit adjustment
5. The fixture accommodates specimens of various shapes and sizes
6. Flexible X and Z movement facilitates specimen positioning
7. One-touch operation allows for the entire test process to be completed with a single button, eliminating the need for complex button switching.
8. The specimen trolley is fully enclosed and prevents tipping.
9. Equipped with a flame height gauge for convenient flame height monitoring.
10. Overtemperature protection

Glow Wire Test Machine Specification:

Glow Wire Test Machine Technical Parameters:

1. Glow Wire Temperature: 500-1050°C ±2°C, continuously adjustable
2. Glow Time: 0-999.9s ±0.1s, adjustable (typically 30s)
3. Ignition Time: 0-999.9s ±0.1s, automatic recording, manual pause
4. Extinction Time: 0-999.9s ±0.1s, automatic recording, manual pause
5. Thermocouple: Φ1mm imported armored (K-type) thermocouple
6. Glow Wire: Φ4mm nickel-chromium wire
7. Penetration Depth: 7mm ±0.05mm
8. Sample Pressure: 0.95 ±0.1N
9. Test Speed: 14mm/s
10. Red-line photoelectric stop switch ensures precise limit settings.
11. Thyristor-controlled temperature control system ensures accurate temperature regulation. 12. Digital display of time and temperature for easy observation and recording.
13. Test background: Black background, background illumination ≤ 20 Lux.
14. Test process: Automatic test program control, independent ventilation.
15. Combustion test area volume: >0.5 cubic meters, approximately 900 mm × 590 mm × 1050 mm in length, width, and height.
16. Overall dimensions: 1160 mm in width × 600 mm in depth × 1310 mm in height (including legs).

500-1000 Degree Glow Wire Tester

0.94-0.96 N Flammability Test Equipment

10mm Thick White Pine Wood Glow Wire Test Machine

Glow Wire Tester IEC 60695-2-10 with 500-1000 Degree Range and 0.94-0.96 N Pressure for Flammability Testing Images